Acid construction product line
Completely coordinated problem solutions

When it comes to protecting technical structures and systems from corrosion and aggressive media, IPA is the right contact.

The special putty and coating materials available in the acid construction product line can withstand even the most difficult (high) mechanical, chemical and thermal stresses.

Wherever surfaces in containers or on components need to be protected, our special protective materials offer complete protection for your systems and thus guarantee their long-term usability.

Whether it’s floor coverings, lining, seamless coatings or chimney construction, you’re always on the safe side with our special protective building materials.

 

The system of the IPA acid building product line is structured as follows:

  • IPAPOX EW – The all-round material
    Primer, protective coating, self-levelling compound, sealing layer, laying and jointing material or for lining
  • laminate systems
  • Vinyl ester resin laying and jointing putty
  • Furan resin laminates and putties
  • phenolic resin laminates and putties
  • water glass putty

The effects of the products are intertwined and ensure an optimal result.

 

1. IPAPOX EW – the all-round material
1.1 Ipapox EW thin coating

Ipapox EW Thin Coating is an epoxy resin based coating material and is suitable for protecting concrete or steel floors, ceilings and walls exposed to moderate thermal and mechanical stress. Temperature load 60-70 °C. Used in particular as an exterior and interior coating for industrial buildings (factories, chimneys, etc.).

 

1.2 Ipapox EW filler
Ipapox EW filler is an epoxy resin-based coating material and is suitable for protecting floor and wall surfaces made of concrete or steel that are exposed to severe thermal and mechanical stress. Suitable for forklifts. By adding IPA filler conductive or black, electrostatically conductive coverings can be produced.

 

1.3 Ipapox EW putty
Ipapox EW putty is an epoxy resin putty and is suitable for protecting floor and wall surfaces made of concrete or steel that are exposed to very high thermal and mechanical stress. Suitable for forklifts. When adding IPA filler, conductive or black, electrostatically conductive coverings can be produced, as with the fillings.

 

1.4 Ipapox EW-HT
Ipapox EW-HT Primer is suitable as a primer or sealer on concrete and steel surfaces. Filled with Ipapox EW filler fine, highly resilient surfaces are created. Due to its high temperature resistance – up to + 120°C. (dry) – it can be used in many ways.

 

1.5 Ipapox EW-HT laminate high temperature resistant
IPAPOX EW-HT LAMINATE is a white-yellow, approx. 3 mm thick glass mat reinforced lining system based on an epoxy resin. Very good mechanical and chemical resistance, plus high temperature resistance up to 160°C (dry).

 

2. Laminate systems

 

3. Vinyl ester resin laying and jointing putties

 

4. Water glass putty