IPA FLOOR COATINGS
Surface protection for trade and industry

Coating is a surface protection measure that results in continuous, even layers on the concrete surface and filled pores. Coatings require at least a primer and, in the case of larger pores, unevenness and other imperfections, a scratch or leveling filler.

Depending on the application, certain requirements of the wear layer are necessary:

  • good water vapor permeability and high resistance to carbon dioxide diffusion
  • Heat resistance (according to ZTV-BEL-B)
  • grip
  • chemical resistance
  • conductivity
  • cleaning possibility
  • crack bridging
  • wear resistance

Combinations of these properties may be required and can be achieved with special coating systems, e.g. B. for water protection according to the WHG and the LAU system ordinance.

Here, under certain circumstances, coatings are required that are both crack-bridging, chemical-resistant and electrically conductive.

The recommended approach

The primer is not an independent surface protection measure. It represents the preparation of the actual coating and has several important functions:

  • Closure of pores and prevention of penetrating (seepage) of subsequent binders
  • consolidation of the subsoil
  • Increasing the adhesive bond between the substrate and the coating combined with scattering of the primer
  • Sealing off the coating against rising damp or air and alkalis or from the substrate
  • Primer for damp substrate IPANOL IH

In the case of uneven and/or rough surfaces or substrates with cavities and nests of gravel, the substrate should be treated with a so-called pore, cavity, scratch or leveling filler. Filling is usually required for crack-bridging coatings in order to achieve a uniform layer thickness and thus uniform crack bridging.

The ability of the coatings to bridge cracks can be improved by making them more flexible and/or increasing the thickness of the layer. It is also possible to reinforce the coating systems with glass or polyester fleece or glass mesh fabrics.

Coatings with increased resistance to mechanical and chemical attack are applied in layer thicknesses of up to approx. 5 mm. In contrast to thin coatings, these thick coatings can also be mixed with fillers such as fine quartz sand.

Our coating systems

CEMENT SCREED SYSTEMS

IPA Mörtel Fussboden MF5
Polymer-modified, cement-based mortar for coating of floors
TECHNICAL DATA SHEET IPA MÖRTEL FUßBODEN MF5

IPA Mörtel Fussboden MF10
polymer-modified, cement-based mortar for coating of floors
TECHNICAL DATA SHEET IPA MÖRTEL FUßBODEN MF10

IPA Mörtel Fussboden MF20
polymer-modified, cement-based mortar for coating of floors

IPA liquid pH+
Synthetic dispersion for addition into cement based mortar systems
TECHNICAL DATA SHEET IPA LIQUID PH+

IPA Mörtel Haftbrücke HB
Cement-bound adhesive slurry for mineral substrates

 

COATINGS FOR CRAFTS AND INDUSTRY

IPAPOX FB
Epoxy Coating Resin for Industrial Flooring
TECHNICAL DATA SHEET IPAPOX FB

IPAPUR GB
Economic, sturdy,-tough-elastic PU-coating
TECHNICAL DATA SHEET IPAPUR GB

 

COATINGS FOR THE FOOD INDUSTRY

IPAPOX B/TR

 

COATINGS FOR BRIDGE SEALING

IPANOL IH
Injection and Grouting Resin for Gravity-Actuated Crack Bonding and Making Up High-Strength,
Impact-Resistant Resin and ECC Mortars.
TECHNICAL DATA SHEET IPANOL IH

IPA PU Flüssigfolie
Crackbridging liquid Pu-membrane for waterproof concrete-coating
TECHNICAL DATA SHEET IPA PU FLÜSSIGFOLIE

 

COATINGS WITH INCREASED CHEMICAL RESISTANCE

IPA Polyschicht
Polymer/Silicate Coating system with General building supervision approval
TECHNICAL DATA SHEET IPA POLYSCHICHT®

IPA Polyschicht DOM
Dissipative, Polymer/Silicate Coating system for dome shafts with General building supervision approval
TECHNICAL DATA SHEET IPA POLYSCHICHT® (DOM-L) 

IPAPOX EW
Chemical Resistant Epoxy Coatings
TECHNICAL DATA SHEET IPAPOX EW

IPAPOX EW/HT
Chemical resistant coatings based on epoxy resin
TECHNICAL DATA SHEET IPAPOX EW-HT

 

COATINGS WITH CRACK-BRIDGING PROPERTIES

IPA PU Flüssigfolie
Crackbridging liquid Pu-membrane for waterproof concrete-coating
TECHNICAL DATA SHEET IPA PU FLÜSSIGFOLIE

IPAPUR Einbettschicht
Economic, sturdy,-tough-elastic PU-coating
TECHNICAL DATA SHEET IPAPUR EINBETTSCHICHT

 

CONDUCTIVE FLOOR COATINGS

IPAPOX EW
Chemical Resistant Epoxy Coatings
TECHNICAL DATA SHEET IPAPOX EW

IPA Polyschicht
Polymer/Silicate Coating system with General building supervision approval
TECHNICAL DATA SHEET IPA POLYSCHICHT

IPA Polyschicht DOM
Dissipative, Polymer/Silicate Coating system for dome shafts with General building supervision approval
TECHNICAL DATA SHEET IPA POLYSCHICHT® (DOM-L)

 

DECORATIVE FLOOR COATINGS

IPAPOX FB
Epoxy Coating Resin for Industrial Flooring
TECHNICAL DATA SHEET IPAPOX FB

IPAPUR GB
Economic, sturdy,-tough-elastic PU-coating
TECHNICAL DATA SHEET IPAPUR GB