SEPARATOR, TANK & LAU PLANT REFURBISHMENT
IPA system with DIBT approval
Oil separators, petrol or grease separators are waste water treatment systems that are subject to extreme requirements. The IPA system for the rehabilitation of separator systems was developed together with experts and processors. The effects of the products are intertwined and ensure an optimal result.
The IPA system for separator, tank & LAU system rehabilitation consists of three steps. The sanitation of a separator with the complete IPA system can be done within a day.
The IPA system for separator renovation is structured as follows:
IPANEX plugging mortar is a fast-setting, swellable cement mortar for sealing water ingress, even when there is water pressure
Technical data sheet IPANEX STOPFMÖRTEL
IPAPUR VM, VM1k
IPAPUR VM is a low-viscosity 2-component polyurethane resin that only forms a foam when it comes into contact with water and thus forms a plug-like seal.
IPAPUR VM1k is a low-viscosity, 1-component polyurethane resin that only forms a foam when it comes into contact with water and thus forms a plug-like seal.
Technical data sheet IPAPUR VM 1 K
IPA Unimörtel Rapid
IPA Unimörtel Rapid is a quick-setting, low-shrinkage, cement-based repair mortar for use in areas with moisture, for repairing defects and creating fillets on concrete parts.
Technical data sheet IPA Unimörtel Rapid
IPA UNIMÖRTEL is a dry mortar according to DIN 18557 consisting of cement according to DIN 1164, sand, additives and additives. IPA UNI MÖRTEL has a set open time & is only mixed with water.
Technical data sheet plain mortar
IPA poly layer is a plastic-modified silicate coating with DIBT approval, resistant from ph=0 to ph=14 for dome shafts, separators, tank pans and Lau systems according to WHG § 62
Technical sheet IPA POLYSCHICHT®