IPA injection machines

IPA Schneckenpresse

incl. 5m delivery hose, operated on 220 V, 16 amps, with electronic speed control, and remote control. Used for low-pressure injection of cement suspensions and pasted slurries
Easy and uncomplicated handling thanks to continuously variable electronic speed control, advance/return speeds, and remote control unit.

IPA HDL 4 Hochdruckgerät

Air-actuated high-pressure injection system suitable for injecting low to mediumviscosity materials. controllable high-pressure section thanks to pressure limiting valve. Easy cleaning thanks to bypass valve.
Specifications: Air requirements: approx. 150 l/min
Income air Pressure multiplication: 42:1
Capacity: 6 liters
Delivery: 2 L/min
Pressure: max. 400 bars

IPA 2K Injektionsanlage

Air-actuated high-pressure injection system suitable for injecting of rapid setting 2 comp. Injection resins like IPACRYL GEL., controllable high-pressure section thanks to pressure limiting valve.
Specifications: Air requirements: pprox. 400 l/min
Income air Presure multiplication: 28:1
Capacity: 6 liters
Delivery: 2 L/min
Pressure: 20bars up to max. 280 bars

IPA Akku-Injektionspresse

The IPA Electric Injection Gun is a battery operated grease gun. The gun was developed for manual lubrication of grease points and includes a pressure Safety Valve, a circuit breaker and stroke counter. The IPA Electric Injection Gun is driven by a small, low voltage electric motor connected to a threestage planetary gear transmission. The rotary motion of the motor is converted into a reciprocating motion of the plunger using a yoke mechanism. The IPA Electric Injection Gun is a positive displacement single acting pump.

accessories

IPA Stator

Schneckenmantel für IPA Schneckenpresse

IPA Rotor

Rotor für IPA Schneckenpresse aus hochvergütetem Werkzeugstahl

IPA Injektschlauch

IPA injection packers, injectors, injection containers

IPA Injektionspacker Länge 110mm, Ø12mm

Injection packer, 12 mm dia, 110 mm long
Suitable for injections at up to approx. 300 bars
reusable. Suitable, e.g. for horizontal barrier layers.

IPA Injektionspacker Länge 60mm, Ø12mm

12 mm dia, 60 mm long
Suitable for injections at up to approx. 300 bars
reusable. Suitable, e.g. for horizontal barrier layers.
Injection packer,

IPA Schraubpacker Länge 60mm, Ø16mm

IPA Kunststoffpacker Länge 50mm, Ø12mm

IPA Injektor für Flüssigkeiten Außen Ø22mm / Innen Ø5mm

IPA® INJECTOR incl. rubber-nozzle and some nipple replacements.
Sturdy multiple-injection valve; 22mm dia. Useful in low-presssure injection of low to high-viscosity materials.

IPA Injektor für Mörtelverpressung Außen Ø25mm / Innen Ø10mm

IPA Tröppl

Vorratsbehälter für nachträgliche Horizontalsperren mit Jektipal