IPA SUBSTRATE CONSOLIDATION, SALT TREATMENT

DURIPAL

Alkali silicate solution for solidification and instead 0f water saturation of Surface for mineral substrates, prevents the transport of harmfull salts.
Consumption with twice impregnation approx. 0.6 l / m²; With a single impregnation approx. 0.4 l / m²

IPACID
Algae destruction and fungicide approx. 200 ml / m²

IPA ADDITIVES FOR SITE-MIXED MORTARS

IPANEX

Additive Used To Make Priming Coats, Impervious Plaster and waterproof Concrete, Hard-Wearing Screeds and Coating

IPANITH E64

Low-viscosity concentrated compound used to make site-mixed rehabilitating plasters with high vapour diffusion; incl. official test certificate.

IPA PREMIXED PLASTERS

Adhesion Promoter, Basic Plaster

IPA Haftgrund

Adhesion promoter, mineral based plaster for all IPA systems

IPA E64 Porengrundputz

High porosity base coat plaster for leveling of substrate for humid and salty masonry

IPA PREMIXED PLASTERS

Refurbishment Plaster

IPA E64 Sanierputz grau

Spray appliable Refurbishment Plaster  high damp diffusion, high porosity, water repellent, of recognized biological efficiency; incl. official test certificate

IPA E64 Sanierputz weiß

Refurbishment Plaster White, high damp diffusion, high porosity, water repellent, of recognized biological efficiency; incl. official test certificate

IPA Sanier- und Dämmputz UL

Extremely lite weight premixed mortar for plastering salty, moist interior and exterior walls, ready to use, in accordance with DIN 18557 white, especially for  plastering old buildings

IPA PREMIXED PLASTERS

Finish Coat

IPASAN Feinputz weiß

White, for very smooth surface finishing water-repellent, diffusible fine plaster for mineral based plasters and refurbishment plasters

IPA Mineral Based Waterproofing Compounds

IPA Unimörtel

Repair and waterproofing mortar with rapid curing
Consumption approx. 20 kg / m2 per cm of plaster thickness

IPA Dichtschlämme

Crystalline, Cementitious  waterproofing, for positive and negative side application.
Consumption approx. 3-6 kg / m2 depending on water pressure

IPA Dichtschlämme Kanal ph+
Cement-based thin-layer  waterproofing, high sulfate resistant  for positive and negative side application.
Consumption approx. 3-6 kg / m2 depending on water pressure

IPA Dichtschlämme BHD
Cement based waterproofing slurry for  water pressure up to 70m WC, can also be used for high negative water pressure

IPA Trinkwasserschlämme TW
White, cement-based waterproofing slurriy for coating and sealing drinking water containers, with official test certificates

IPA Elastikschlämme grau, weiß

2 Comp. Flexible Slurry for waterproofing, with General
building supervision approval Z-59.12-390

IPA bituminous waterproofing

IPAFLEX N

Crack-bridging bitumen-based waterproofing

IPAFLEX Bitu 1K

One-component bitumen thick coating

IPAFLEX Bitu 2K

Two-component bitumen thick coating

IPA screed and mortar systems

IPA Mörtel Fußboden MF 20

Polymer-modified, cement-based mortar for coating of floors with thickness of 20mm in one coat

IPA Mörtel Fußböden MF 10

Polymer-modified, cement-based mortar for coating of floors

IPA Mörtel  Fußboden MF 5

Polymer-modified, cement-based mortar for coating of floors

IPA Mörtelhaftbrücke HB

Cementitious adhesive slurry for mineral substrates

IPA Liquid ph+

Syntetic dispersion for addition into cement based mortar system

IPA screed, screed binder

IPANEX  (wasserundurchlässig)

Highly wear-resistant screed based on the additive IPANEX®

IPA facade repair and facade protection

IPA Steinersatz

Modified mineral dry mortar

IPA Fugenmörtel Z

Factory-made cement-based dry mortar of mortar group III for masonry restoration

IPA Fugenmörtel Trk

Factory-made dry mortar on Traßkalkbasis the mortar group M5 gem. DIN EN 998-2

IPA Fugenschlämmmörtel

Plastic-coated dry mortar

IPA concrete renovation

IPATOP MKH

Polymer modified, mineral rust inhibitive 2-comp-coating

IPATOP SM Betonspachtel

Adhesion promoter/knifing filler, mineral-based, resin-enhanced, plant-mix dry mortar

IPATOP Reparaturbeton Rb1k

IPATOP RB 1K is a premixed, single component, cementitious, dry polymer modified high strength, versatile repair mortar. IPATOP RB1k contains a blend of graded silica sands to produce a repair mortar that can be used in a wide range of consistencies.

IPATOP Reparaturbeton

Coarse-grained mortar, mineralbased, plastic-enhanced, plant-mix dry mortar for layers up to thickness 3cm, admixture Ipatop Liquid AMF

IPATOP Liquid AMF

Acrylic bonding agent, synthetic resin dispersion used to improve mineral-based mortar systems.

IPA wastewater treatment plants

IPANEX Stopfmörtel

IPANEX is a chloride-free liquid additive used to make mortar and concrete impervious to pressurised water by preventing any capillary effect. By reducing the water/cement ratio and simultaneously enhancing processability, IPANEX will substantially improve mortar and concrete quality.

IPA Dichtschlämme Kanal ph+

IPA DICHTSCHLÄMME KANAL ph+ is a mineral cement-based waterproofing slurry with high sulphate-resistance.

IPA water stopper

IPAFIX Schnellmörtel

A cementitious, ready-mixed, rapid setting compound to stop water and moisture ingress.

IPANEX Flächendicht WF

IPANEX Flächendicht WF is a factory-mixed, waterproof rapidly setting mortar based on cement according to DIN 18557.

IPA mineral mortar (reprofiling)

IPA Unimörtel

IPA Unimörtel is a fast setting watertight ready to use repair mortar consistent of cement, silica sand and additives. It has an open time of 20 min at 20°C and is only mixed with water

IPA Unimörtel Rapid

IPA Unimörtel Rapid is a shrinkage compensated watertight mortar fast setting (10min open time), early high strength for use in water bearing areas, downtime for sewer line (water reload) 30min

IPA Unimörtel Konz

Cement based mortar concentrate 1:1 with silica sand gives fast setting mortars with high early strength and elevated mechanical and chemical resistance for waste water applications

IPAFIX Mörtel

Setting and repair mortar for sewage treatment plants

IPA Mineral Protective Coatings

IPA Liquid ph+

Ready to use liquid component for IPA Slurry HS and IPA Mortar ph+, based on synthetic polymers, to increase resistance against sulphate attack up to ph = 4

IPA Mörtel Kanal ph+

2 Component mortar to repair sewage constructions with high resistance against sulphuric acid up to ph=4 Liquid component : IPA Liquid ph+

IPA Mörtel Kanal ph+ 1k

IPA Mörtel Kanal ph+ 1k is a 1-component mortar, based on standard cements, with high sulphate-resistance for repairing and coating of mineral substrates. The may be applied vertically and horizontally on any kind of sewage constructions

IPA Unimörtel Kanal ph+

Plastic-annealed repair mortar for waste water plants, dry mortar according to DIN 18557 consisting of cement according to DIN 1164, silica sand, additional agents and additives.

IPA Silica Haftbrücke

Adhesion promoter for IPA SILICA mortar consistent of a powder and a liquid component, used to ensure proper bonding between substrate and IPA Silica mortar

IPA 2k Silicamörtel

IPA 2K Silica Mortar is 2 component mortar system exclusively based on mineral components with high chemical resistance up to pH = 1. Its binder system is based on silicates.

IPAFIT Pu/Silikatmörtel

Polymer modified 3-comp. mortar, chemical resistant in the range from ph=0 to ph=14 for coating of manholes for fuel tanks, applicable in one layer up to 4 mm thickness

IPA channel grout

IPA Verpressmörtel Kanal

Very quick setting injection grout on cement base, especially for subsequent injections of pipe coupling (by robots), and pipe coupling offsets, to subsequently refill voids and cavities between new and old linings with the relining method.

IPA Verpressmörtel Kanal S

Very quick setting injection grout on cement base, especially for subsequent injections of pipe coupling (by robots), and pipe coupling offsets, to subsequently refill voids and cavities between new and old linings with the relining method.

IPA injection and grouting mortar

IPA Injektionsmörtel VMQ

Mineralic mortar, shrink compensated for filling boreholes, and sealing of masonry cracks

IPA Injektiosnmörtel THS

Premixed shrink compensated mineral Injection mortar with high sulphate resistance for masonry containing gypsum

IPA PM Pulver

Dry powder used to make sitemixed, non-shrinking and well-sliding grouting mortar

IPA Vergussmörtel VGM

Frühbelastbarer, zementgebundener, mineralischer Vergussmörtel

IPA Vergussmörtel TG

High early and high ultimate strength non shrink structural grout

IPA Injektionsmörtel VM3

Zementgebundenes Injektionsmaterial für Rissinjektionen ab 3 mm Rissbreite