IPA Pu based Resins

IPA Pu based foaming Injection Resins

IPAPUR VM

Low viscose, elastic, foaming Pu Injection Resin Used To Seal WaterBearing moving cracks and Joints

IPAPUR VM 1K

Single Component Polyurethane Injection Resin, Foaming in Contact with
Water, used To Seal Water-Bearing Cracks and Cavities

IPAPUR VP

Polyurethane Injection Resin, Foaming in Contact with
Water, used To Seal Water-Bearing Cracks and Cavities
Higher viscosity for hot countries

IPA Injections Resins on Polyurethane Base

IPAPUR IS

Rigid setting Injection resin, clear, solvent-free, low-viscose, 2 comp. Polyurethane resin, for coupling connections

IPAPUR IF

PUR Injection grout for elastic sealing of cracks in concrete structures

IPAPUR IF NV100

PUR Injection grout for elastic sealing of cracks in concrete structures

IPA Sealers, Paints & Coatings on Polyurethane Base

IPA PU-Flüssigfolie

IPA Pu-Flüssigfolie is a high-elastic, tar-free 2-Component-Polyurethanecoating-material. IPA Pu-Flüssigfolie viscous is formulated for vertical applications.

IPAPUR GB

Economical, sturdy, viscoplastic PUR leveling coating

IPAPUR Einbettschicht

For elastic, crackbridging coatings on concrete –cement pavements and melted-asphalt, (melted-asphalt only in interiors), with existing cracks or where crack-formation is to be expected.

IPAPUR VS

PIGMENTED, 2COMPONENT-PU- Top-coating FOR INTERIOR use IPAPUR VS/LE IS AT SOLVENT-FREE, UV-stable, pigmented, 2-Component-PUR- Top-coating for outside-applications.

IPAPUR VS/LE

IPAPUR VS IS A SOLVENT-FREE, PIGMENTED, 2COMPONENT-PU- Top-coating FOR INTERIOR use IPAPUR VS/LE IS AT SOLVENT-FREE, UV-stable, pigmented, 2-Component-PUR- Top-coating for outside-applications.

IPAPUR VS/LE Matt

IPAPUR VS/LE matt transparent and IPAPUR VS/LE matt are UV-stable, transparent or pigmented, 2Component-matt PUR- Top-coating for outside- and inside applications.